peplink MediaFast 200, User Manual

Page: 70 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -70 / 269 - Copyright © 2016 Peplink
WAN Connection Settings
WAN
Connection
Name
Enter a name to represent this WAN connection.
Network Mode
Choose the appropriate network mode for the cellular connection.
Routing Mode
Select the routing method to be used in routing IP frames via the WAN connection. The mode
can be either NAT (network address translation) or IP Forwarding. Click the
button to
enable IP forwarding.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the DNS
(Domain Name System) servers to be used when a DNS lookup is routed through this
connection.
Selecting Obtain DNS server address automatically results in the DNS servers assigned by
the PPPoE server being used for outbound DNS lookups over the WAN connection. (The DNS
servers are obtained along with the WAN IP address assigned from the PPPoE server.)
When Use the following DNS server address(es) is selected, you can put custom DNS
server addresses for this WAN connection into the DNS Server 1 and DNS Server 2 fields.