PePLink Balance Series v4.0 User Manual
Page 22
7.2
Configuration with Setup Wizard
The Setup Wizard of PePLink Balance simplifies the task of configuring WAN connection(s)
by guiding the configuration process step by step.
To begin, click
Setup Wizard
after connecting to Web Administration Interface.
Click on the appropriate check box(es) to select the WAN connection(s) to be configured:
Select the connection type from the following screen:
Depending on the selection of connection type, further configuration may be needed. For
example, PPPoE and Static IP require additional settings for the selected WAN port. Please
refer to Section 10,
Configuration of WAN Interface(s)
, for details on setting up DHCP,
Static IP, PPPoE, and GRE.
After finishing the last step in the Setup Wizard, please click
Apply Changes
on the page
header to effect the configuration changes.