peoplenet eDriver Logs BLU.2 Installation Manual Download Page 18 | Manualshive

Page: 18 / 23

background image

18

© 2010 PeopleNet Communications. All rights reserved.

g3 Firmware Download Process

g3 Firmware Download Process

This process updates the g3 firmware to be compatible with the BLU2 device.

1. Insert the provided fuses to power up BLU2 and the g3.



The OBC needs a firmware update. The screen will display “ A code mismatch is present. If the OBC

code is not updated , the device will have limited functionality. Would you like to update the OBC?

2. Press

Yes

to continue.

The update process will begin and last about 7-10 minutes.
The screen will display “OBC Firmware Updater” and show the progress of the installation.
The update is completed when the screen displays “

OBC firmware upgrade successful.

”

3. Press

OK

and proceed to “BLU2-OBC Synchronization Process” on page 20 for synchronization.

«
...
16
17
18
19
20
...
»

Summary of Contents for eDriver Logs BLU.2
























Reviews:

No comments

Related manuals for eDriver Logs BLU.2

Brand: Oki Pages: 8

Stylus Pro 7900

Brand: X-Rite Pages: 36

Brand: Gates Pages: 2

AJHVF21G - HD EVF - MULTI-LANG

Brand: Panasonic Pages: 4

Brand: Abibird Pages: 2

Brand: Daihatsu Pages: 340

Brand: Abicor Binzel Pages: 20

Brand: Cane Creek Pages: 2

Brand: Napoleon Pages: 4

Brand: hager Pages: 4

Brand: Nautronic Pages: 7

Brand: NAPCO Pages: 16

Brand: RayTek Pages: 2

Brand: Veeder-Root Pages: 2

Brand: Sacred Sun Pages: 19

ETIQUETTE MEMOIRE M I740N

Brand: Aastra Pages: 1

Energi Savr Node QSN-4S16-S

Brand: Lutron Electronics Pages: 12

Brand: Celestron Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands