peoplenet eDriver Logs BLU.2, Installation Manual

Page: 21 / 23

21
© 2010 PeopleNet Communications. All rights reserved.
BLU2-OBC Synchronization Process
Error Code Recovery
Whenever an error code appears during the synchronization process, it is necessary to resubmit the installation.
To resubmit an installation;
1. Make note of the Error Code # for future reference in this procedure.
2. Press the Cancel button on the error screen and allow the BLU2 device to advance to the Login screen.
3. Verify the Login screen is displayed and press and hold the RED button at the bottom of the BLU2 unit.
4. You may need to press the center button with a circle on it to restart the device and to reactivate the
installation.
5. Wait for the Process Installation screen to reappear.
6. Look up your Error Code # in the following table and follow the Recovery instructions.
Error Code # Cause Recovery
1 or 4
BLU2 device not set up for a
New Installation.
Proceed to “Installing a BLU2 Device” on page 20 and Select
No in Step 2.
2 or 3
Truck Number discrepancy. Proceed to “Installing a BLU2 Device” on page 20 and verify
your Truck Number before pressing SUBMIT .
5
BLU2 device set up as a New
Installation.
Proceed to “Installing a New BLU2 Device” on page 20 and
Select Yes in Step 2.