GA-586IP
_____________________________________________________________
_____________________________________________________________28
•
CPU Internal Cache / External Cache
These two categories speed up memory access. However, it depends on CPU / chipset design. The default value is
Enabled.
Enabled
Enable cache
Disabled
Disable cache
•
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the computer. If it is set to Enable, BIOS will
shorten or skip some check items during POST. The default value is Disabled.
Enabled
Enable quick POST
Disabled
Normal POST
•
Boot Sequence
This category determines which drive computer searches first for the disk operating system (i.e., DOS). Default value
is A,C.
A,C
System will first search for floppy disk drive then hard disk drive
C,A
System will first search for hard disk drive then floppy disk drive
•
Swap Floppy Drive
The default value is Disabled.
Enabled
Floppy A & B will be swapped under DOS
Disabled
Floppy A & B will be normal definition
•
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40 tracks while
720 K, 1.2 M and 1.44 M are all 80 tracks. The default value is Enabled.
Enabled
BIOS searches for floppy disk drive to determine if it is 40 or 80 tracks, Note that BIOS can not
tell from 720 K, 1.2 M or 1.44 M drive type as they are all 80 tracks
