BIOS Setup
29
IRQX and
DMAX assigned
to
Choose
PCI/ISA PnP
or
Legacy ISA
. If the first
item is set to
Manual
, you could choose IRQX
and DMAX assigned to PCI/ISA PnP card or ISA
card.
PCI IRQ
Activated By
Choose
Edge
or
Level
. Most PCI trigger signals
are Level. This setting must match the PCI card.
PCI IDE IRQ
Map To
Select P
CI-AUTO,
ISA
, or
assign a PCI SLOT
number
(depending on which slot the PCI IDE is
inserted). The default setting is PCI-AUTO. If
PCI-AUTO does not work, then assign an
individual PCI SLOT number.
Primary IDE
INT#
Choose INTA#, INTB#, INTC#, or INTD#. The
default setting is INTA#.
Secondary IDE
INT#
Choose INTA#, INTB#, INTC#, or INTD#. The
default setting is INTB#.
Used MEM Base
Addr
Choose C800, CC00, D000, D400, D800, or
DC00 for setting the I/O address of your add-on
card. You should ask your add-on card dealer for
the exactly I/O address. Use this function only
when problems occur while using the add-on
card.
Used MEM
Length
Choose 8, 16, 32, or 64 for setting the I/O address
length of your add-on card. You should ask your
add-on card dealer for the exactly I/O address
length. This item appears only when you specify
the add-on card I/O address.
3.
After you have finished with the PCI Slot Configuration, press the
<ESC> key and follow the screen instructions to save or disregard
your settings.
