BIOS Setup
33
RTC Power On Controller
Choose
Enabled
(default) or
Disabled
.
Enabled Ð Allows you to setup a period
of time to power on the
system after you turn off the
system from Windows 95.
Deisbled Ð Disable this function.
RTC Power On
(Hour Ctrl), (Minute
Ctrl), or (Second Ctrl)
Allows you to set the RTC Power On
timer in hour (0 ~23), minute (0 ~59), or
seconds (0 ~59).
Onboard FDC Controller
Enabled Ð Use the on-board floppy
controller (default).
Disabled Ð Turn off the on-board floppy
controller.
Onboard Serial Port 1/
Onboard Serial Port 2
Choose serial port 1 & 2Õs I/O address.
Do no set port 1 & 2 to the same value
except for Disabled. Options are as
follows:
COM 1/3F8H
| COM3/3E8H
COM 2/2F8H
| COM4/2E8H
(default)
UR1 (UR2) Mode
Choose Standard (default), IrDA or
ASKIR to meet the specification of your
Infra Red device.
UR1 (UR2) Duplex Mode
Choose
Half
or
Full
to meet the
specification of your Infra Red device.
This option appears only when you
choose everything but
Standard
in the
UR1 (UR2)
Mode
function.
Onboard Parallel Port
Choose the parallel port I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5
Printer Port Mode
Choose
ECP + EPP
(default),
SPP
or
EPP
,
ECP
mode. The mode depends on
your external device that connects to this
port.
