Page 26
Pentek Model 78661 Installation Manual
Rev.: 1.7
2.11
Installing the Model 78661 in a Personal Computer
(continued)
6) The PCIe carrier has a 6−pin power connector to supply the majority of power to the
components (as illustrated in
). This is a standard PCI Express power
connector used in PCs with a PCI Express bus. Plug a spare power connector from
your PC’s power supply into this connector.
7) Secure the board to the PC chassis using a screw at the top of the PC slot panel.
8) The PC cover may now be replaced and power may be reconnected.
This completes the installation procedure.
Figure 2
−
9: Model 78661 Mounted in PCIe Slot
PC
Motherboard
XMC to PCIe Carrier
PCIe
Slot
PCI
Slot
PCIe
Slot
Panel
SER I/O
A
SER I/O
B
GPIO
POWER
XMC Module
