10
3. Basic Field Checking Procedures
Checks and Adjustments should be performed before and during
measurement.
3.1 Laser Plummet
To activate the laser plummet:
To deactivate:
Check if the laser spot on the ground stays at the same position when
rotating the instrument around the vertical axis.
To adjust the laser plummet: Contact your local dealer
3.2 Laser Pointer
To activate the laser pointer:
To deactivate:
Check if the projected laser spot points are at the same position that
is aimed by the center of the cross-hair line of the telescope.
To adjust the laser pointer: Consult your local dealer.
RED MARK
PEN-R400VDN-QUICK-EN part1 23-10-2013 14:54 Page 10