20
Press the [MEAS] to measure the Distance and display the Coordinates.
1) Press [F5][PAGE] twice to view [F3][ANG & DIST].
2) Press [F3][ANG & DIST] to view [F3][COORD.] and Angle and Distance values.
3) Press [F3][COORD.] to view [F3][ANG&DIST] and Coordinates.
4.3 Measuring
Aim at the reference point and press [ENT] to view the MEASURE screen.
Then, aim at the Target point and press the [F1][MEAS] to
measure it.
Press [F3][ME/SAVE] to measure and save the measured data.
Press [F2][SAVE] to save the measured data.
Press [F4][EDIT] to edit the PN, Point Name, PH, Prism Height and PC, Point Code.
Input your desired Point name, Prism height and Point code.
Press [F5][ACCEPT] if the current PN, PH and PC are acceptable.
If PointCode exists, you can easily select them from the list or edit one of them after pressing the
[ENT]. For using Point Code List, please refer to “4.4. Point Code”.
4.4 Point Code
The PC, PointCodeList can be used for adding your desired attributes to Rect. and Polar data. If point
codes are stored under the job named "PointCodeList", you can easily select one of the PointCode
from the list or edit one of them after pressing [ENT]. Please, note that Point Code, which is saved in
the other job can not be refered as a list.
“PointCodeList” can be created by either using “5.2 Create the Rectangular Point” function or
Importing “PointCodeList” file.
Making “PointCodeList”:
Create / select “PointCodeLList” job using “3. FILE MANAGER”. Then input point data according to
“5.2 Create the Rectangular Point”. Input any value into “PN” field and leave the X, Y, and Z field “0”.
And input PointCode data into “PC” field.
Importing “PointCodeList” file:
PointCodeList can be used after importing it from external devices (ex. PC ). After importing, it is
stored in the internal memory of the instrument. To store user defined ”PointCodeList”, please carry
out following procedure.
Preparing “PointCodeList” file:
Make a “PointCodeList.csv” file with reference to a sample “PointCodeList.csv” file that is contained
in the “R-200 Supplement Disk” for the format.
Please, note that the newly entered PointCode on the instrument is not added to the PointCodeList
that is stored in the memory. In this case, edit “PointCodeList.csv” separately.