17
Getting Started
1
Data Backup
Very occasionally, data stored in the Built-in memory becomes unreadable. As
a backup measure, we recommend that you download important data to a PC or
store the data in a media other than the Built-in memory.
Precautions When Using a SD Memory Card / MultiMediaCard
• Make sure that the camera is turned off before opening the battery/Card cover.
• The SD Memory Card / MultiMediaCard is equipped with
a write-protect switch. Setting the switch to [LOCK]
protects the existing data by prohibiting recording of new
data, deletion of existing data or formatting of the card.
• Care should be taken if you remove the SD Memory Card / MultiMediaCard
immediately after using the camera, as the card may be hot.
• Do not remove the SD Memory Card / MultiMediaCard or turn the camera off
while data is being recorded on the card or transferred to PC using USB cable
as this may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card / MultiMediaCard or subject it to violent
impact. Keep it away from water and store away from high temperature.
• Be sure to format unused SD Memory Card / MultiMediaCard or SD Memory
Card / MultiMediaCard that have been used on another camera. Refer to
“Formatting a SD Memory Card / MultiMediaCard and the Built-in memory”
(p.96) for instructions on formatting.
• Never remove the SD Memory Card / MultiMediaCard during formatting as this
may cause the card to be damaged and become unusable.
• The data on the SD Memory Card / MultiMediaCard may be erased in the
following circumstances. Pentax does not accept any liability for data that is
erased
• when the SD Memory Card / MultiMediaCard is mishandled by the user.
• when the SD Memory Card / MultiMediaCard is exposed to atic electricity or
electrical interference.
• when the card has not been used for a long time.
• when the card is ejected, the AC adapter is disconnected or the battery is
removed while the data on the card is being accessed.
• The SD Memory Card / MultiMediaCard has a limited service life. If it is not
used for a long time, the data on the card may become unreadable. Be sure
to make a backup of important data on a PC.
• Avoid using or storing the card where it may be exposed to static electricity or
electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed
to rapid changes in temperature or to condensation.
Write-protect switch
e_kb359.book Page 17 Friday, August 8, 2003 4:15 PM
