NOMENCLATURE, CONTROLS AND FUNCTIONS
9
3
Nomenclature, controls and functions
3-1
EPK-700 Video processor
3-1-1
Main body
No. N
ame
F
unction
Ventilation Grid
Allows for adequate ventilation and cooling lamp/unit.
Water Bottle
Receptacle
Accepts air pipe from PENTAX water bottle assembly.
Lamp Cartridge
Access
Provides access to replace lamp cartridge.
Fiber optic
Attachment
AE-P1 adapter for standard Pentax endoscopes. Port accepts video endoscope or fibrescope fibre optic. Adapter can
be changed for use as light source for other manufacturers’ endoscopes or for use with fiberscope video adapter
module.
Endoscope Electrical
Connector
Accepts Colour video endoscope electrical connector or fiberscope video adapter module electrical connector.
CAUTION - Always turn OFF the power switch BEFORE connecting/disconnecting an endoscope. Connecting/discon-
necting the endoscope while the processor is ON could damage the endoscope.
CAUTION - When you take the fiber optic out of this socket, the sleeve of the fiber optic might be hot. Take care when
removing the fiber optic from the socket.
Scope Locking Lever
Open the lever before adjusting or removing an endoscope.
After connecting the endoscope to the processor, close the lever.
Front Panel
See the section 3-1- (2)
Power Switch Lamp
Switch
The processor and the lamp are turned I : ON, or O : OFF.
Switch lights green when switched ON. Switch should not be hit with object like endoscope fiber optic, when being
switched ON or OFF.
NOTE - When power is turned OFF, wait 60 seconds before turning power switch ON. Failure to do so may cause a
malfunction.
NOTE - Before turning the EPK-700 power ON, ensure the air flow vents are not obstructed.
Air Pump Switch
Selects air pump ON/OFF. LEDs or switches light to indicate which is selected.
Water Bottle
See section 3-2.
PENTAX
EPK-700
COPY
RED
BLUE
AUTO
MAN
XLUM
SERVICE
AVE
CENT
CONTR
OL
COLOR
BALA
NCE
BRIGH
TNESS
LAMP
FREEZE
+5
-5
0
AIR PU
MP
POWER
OFF
OFF
ON
ON