Pentax 30 - Optio 30 3.2MP Digital Camera Operating Manual Download Page 18

Page: 18 / 116

Gettin

Sta

rte

Data Backup

Very occasionally, data stored in the Built-in memory becomes unreadable. As
a backup measure, we recommend that you download important data to a PC or
store the data in a media other than the Built-in memory.

Pre

caut

ions when using an SD Memory Card

• Make sure the camera is turned off before opening the battery

/ card cover.

• The SD Memory Card has a write-protect switch. Moving the

switch to the [Lock] position prevents the recording and

deleting of data and the formatting of the card and protects all

saved data.

• When you purchase the SD Memory Cards, access the

PENTAX website and confirm beforehand if they have

compatibilty with your camera. Inquiries on the card

compatibility can also be answered by your nearest PENTAX

service center.

• SD Memory Cards formatted on a PC or device other than the camera cannot

be used. Be sure to format the card with the camera.

• The SD Memory Card may be hot when removed immediately after camera

use. Be careful.

• Do not remove the card or turn off the camera when recording data or playing

back images from the SD Memory Card, or when connected to a PC with the

USB cable. This could cause data loss or card damage.

• Do not bend the SD Memory Card or subject it to violent impact. Do not get it

wet or leave it in a high temperature location.

• New cards or cards used in another camera must be formatted before use. For

more information about formatting the card, see “Formatting an SD Memory

Card or the Built-in Memory” (p.94).

• Do not remove the SD Memory Card while the card is being formatted. The

card may be damaged and become unusable.

• Data stored on an SD Memory Card may be deleted under the following

conditions. PENTAX does not accept any liability regarding deleted data.

(1) When the user mishandles the SD Memory Card

(2) When the SD Memory Card is placed in a location with static electricity or

electrical interference

(3) When the card is not used for a long time

(4) When the card, the AC adapter, or battery is removed while recording or

reading data on the SD Memory Card

• The SD Memory Card has a finite operating life. The stored data may become

unreadable after long periods of disuse. Please periodically backup important

data onto your PC.

• Avoid using or storing your card where static electricity or electrical

interference can occur.

• Do not use or store your card where it may be exposed to sudden temperature

changes, condensation, or direct sunlight.

Write-protect
switch

Summary of Contents for 30 - Optio 30 3.2MP Digital Camera





















































































































Search results

Summary of Contents for 30 - Optio 30 3.2MP Digital Camera

Reviews:

Related manuals for 30 - Optio 30 3.2MP Digital Camera

Brands by name

Popular brands

Pentax 30 - Optio 30 3.2MP Digital Camera, Operating Manual

Search results

Summary of Contents for 30 - Optio 30 3.2MP Digital Camera

Reviews:

Related manuals for 30 - Optio 30 3.2MP Digital Camera

Brands by name

Popular brands