Pentax 19251 - Optio M30 7.1MP Digital Camera Operating Manual Download

Page: 58 / 188

Com

on
O

erati

ons

Press the Green button in

mode.

The function assigned to [Green Button] on
the [

Setting] menu is called up.

Use the four-way controller (

) to change the

settings and press the

button.

The camera returns to capture status.

Using the Green Button

• If the Green Mode has been assigned to the Green button, the

camera enters the Green Mode (p.63) 1.5 seconds after the Green
button is pressed.

• If a function other than the Green Mode has been assigned to the

Green button, the camera returns to the original screen if no
operation is performed for five seconds after the Green button is
pressed.

The function assigned
to Green button

EV Compensation

0 . 0

Summary of Contents for 19251 - Optio M30 7.1MP Digital Camera





























































































































































































Search results

Summary of Contents for 19251 - Optio M30 7.1MP Digital Camera

Reviews:

Related manuals for 19251 - Optio M30 7.1MP Digital Camera

Brands by name

Popular brands

Pentax 19251 - Optio M30 7.1MP Digital Camera, Operating Manual

Search results

Summary of Contents for 19251 - Optio M30 7.1MP Digital Camera

Reviews:

Related manuals for 19251 - Optio M30 7.1MP Digital Camera

Brands by name

Popular brands