Setting the Shooting Functions
38
3
Tak
ing Pi
cture
s
You can choose to have the camera save the following function settings
when it is turned off. By using [Memory] in the Memory screen, you will
not need to select the same settings again when shooting under similar
conditions.
All other shooting-related functions not listed below are saved even if the
camera is turned off.
•
If you select
O
(On), the settings are saved even if the camera is turned
off. If you select
P
(Off), the settings are reset to the defaults when the
camera is turned off.
•
A zoom position in the digital zoom range cannot be saved even when
[Zoom Position] is set to On in [Memory].
Saving the Current Camera Settings
Item
Descriptions
Default Setting
Flash Mode
The selected flash mode other than
,
(Auto)
is saved.
O
Drive Mode
The selected drive mode setting ([Self-timer],
[Cont. Shooting], or [Remote Control]) is
saved.
P
Focus Modes
The selected focus mode other than
=
(Standard) is saved.
P
Zoom Position
The optical zoom position set with the zoom
lever is saved.
P
MF Position
The focusing distance chosen with manual
focus is saved.
P
White Balance
The selected white balance setting other
than
F
(Auto) is saved.
P
AE Metering
The selected AE metering setting other than
L
(Multi-segment metering) is saved.
P
Sensitivity
The selected ISO sensitivity setting other
than Auto is saved.
P
EV Compensation
An exposure setting other than [±0.0] is
saved.
P
Digital Zoom
The digital zoom setting (On/Off) is saved.
O
DISPLAY
The LCD monitor display setting is saved.
P
File #
The file number is saved. If a new SD
Memory Card is inserted, file numbers are
assigned sequentially.
O
Summary of Contents for 18941 - Optio T10 Digital Camera
Page 149: ...147 Memo ...
Page 162: ...Memo ...
