11
•
The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is
not a fault.
•
Periodic checks are recommended every 1 to 2 years in order to
maintain high performance.
•
If the camera is subjected to rapid temperature changes, condensation
may form on the inside and outside of the camera. Therefore put the
camera in a bag or plastic bag, and take the camera out when the
difference in temperature has subsided.
•
Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt,
etc. as this may cause damage to the camera. If rain or drops of water
get onto the camera, please wipe dry.
•
Refer to “Precautions When Using an SD Memory Card” (p.19)
regarding the SD Memory Card.
•
Please note that formatting an SD memory card or built-in memory will
delete all data, however it may still be possible to recover that data
using off-the-shelf data recovery software. Please manage your
camera’s memory at your own risk.
•
Please do not press forcefully on the LCD monitor. This could cause
breakage or malfunction.
•
Be careful not to sit down with the camera in your back pocket as this
may damage the exterior of the camera or the LCD monitor.
•
When using a tripod with the camera, be careful not to overtighten the
screw in the tripod socket on the camera.
•
The AC plug cord supplied with the camera is for exclusive use with the
battery charger D-BC8. Do not use it with any other equipment.
Recycling Batteries
This symbol indicates that the battery is recyclable.
Cover the terminals with insulating tape and take the
battery to a store displaying this symbol.
LED Safety Standard
This device is a digital still camera that conforms to the safety standard
(IEC60825-1) for a Class 1 LED product.
Summary of Contents for 18941 - Optio T10 Digital Camera
Page 149: ...147 Memo ...
Page 162: ...Memo ...
