Pentax 17311 Operating Manual Download Page 117

Page: 117 / 280

115

ting
F

unc

tion
s

Re-compose the picture while
keeping the shutter release
button pressed halfway.

Set [4. AE-L with AF locked] in the [

Custom Setting 1] menu (p.78) to

lock the exposure value while the focus is locked. Exposure is not locked
by default during focus lock.

• The focus is locked while the focus indicator

]

is displayed.

• Turning the zoom ring in focus lock mode may cause the subject to be out of

focus.

• The beep that sounds when the image is focused can be turned off. (p.215)
• You cannot set focus lock when [AF Mode] is set to

(Continuous

mode), the Picture mode is set to

(Moving Object) or

(Scene) mode

is set to

(Stage Lighting),

(Kids),

(Pet) or

(Night Snap). In such

cases, the autofocus continues to focus on the subject until the shutter is
released (Continuous Autofocus).

Locking Exposure when the Focus is Locked

Off

Exposure is not locked when the focus is locked.

Exposure is locked when the focus is locked.

4. AE-L with AF locked

AE is not locked
when the focus
is locked

Off
On

Summary of Contents for 17311

























































































































































































































































































Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands

Pentax 17311, Operating Manual

Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands