background image

25

PENTALIFT EQUIPMENT CORPORATION

M086R06

December 8, 2017 10:37 AM

 LDL Dock Lift Owners Manual

 

WARRANTY 

 

Pentalift Equipment Corporation

 expressly warrants that any product manufactured by 

Pentalift Equipment Corporation

 will be free from defects 

in material and workmanship under normal use for a period of one (1) year from the date of shipment of the equipment, provided the original purchaser 

maintains and operates the product in accordance with proper procedures.  In the event the product proves defective in material or workmanship, 

Pentalift Equipment Corporation

 will at its option: 

 

 

1. Replace the product or the defective portion thereof without change to the purchaser; or 

 

2. Alter or repair the product; on site or elsewhere, as 

Pentalift Equipment Corporation

 may deem advisable, without 

 

    charge to the purchaser. 

 

The warranty stated in the previous paragraph is that expressed by 

PENTALIFT EQUIPMENT CORPORATION

 AND IS IN LIEU OF ALL 

GUARANTEES AND WARRANTIES, EXPRESSED OR IMPLIED BY ANYONE OTHER THAN 

PENTALIFT EQUIPMENT

 

CORPORATION

.  

This warranty does not cover any failure caused by improper installation, misapplication, overloading, abuse, negligence, or failure to lubricate and 

adjust or maintain the equipment properly and regularly.  Parts requiring replacement due to damage resulting from abuse, improper operations, 

improper or insufficient lubrication, lack of proper protection or vehicle impact are not covered by this warranty.  

Pentalift Equipment Corporation 

assumes no responsibility or liability for: 

 

 

1. Consequential damages of any kind which result from use or misuse of the equipment. 

 

2. Damage or failure resulting from the use of unauthorized replacement parts. 

 

3. Damage or failure resulting from modification of the equipment. 

 

4. Damage resulting from the misuse of the equipment. 

 

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF, AND 

THERE IS NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. 

 

Pentalift Equipment Corporation

 warranties extend only to the original product itself.  In no event shall 

Pentalift Equipment Corporation

 be 

responsible for or liable to anyone, including third parties, for special, indirect, collateral, punitive, incidental or consequential damages, even if 

Pentalift Equipment Corporation

 has been advised of the possibility of such damages.  Such excluded damages include, but are not limited to, loss of 

good will, loss of profits, loss of use, interruption of business or other similar indirect financial loss. 

 

Pentalift Equipment Corporation

 DISCLAIMS all liability arising out of the workmanship, methods and materials used by the installer. 

 

Pentalift Equipment Corporation

 DISCLAIMS all liability for premature product wear, product failure, property damage or bodily injury arising from 

improper installation and application. 

 

Pentalift Equipment Corporation

 will not accept any warranty for which the original purchaser does not notify 

Pentalift Equipment Corporation’s

 

Warranty Department of the defect within ninety (90) days after the product defect is discovered.  A fully completed Product Registration Card is 

required prior to the review or processing of any warranty requests or claims. 

 

WARRANTIES, whether expressed or implied, relating to workmanship and materials used in connection with the installation of 

Pentalift Equipment 

Corporation

 products are specifically DISCLAIMED. 

P.O. Box 1510, Buffalo, NY, U.S.A. 14240-1510

Phone: (519) 763-3625  � FAX (519) 763-2894

P.O. Box 1060, Guelph, ON, Canada N1H 6N1

Phone: (519) 763-3625  � FAX (519) 763-2894

WR001R02

NOTE:

 All Pentalift Equipment Corporation products are subject to design improvement through modifi cation without notice.

PENTALIFT EQUIPMENT CORPORATION WARRANTY

Summary of Contents for LDL
































Reviews: