1
ThermalFlo Addendum
THERMALFLO HEAT PUMP CONTROL PANEL
OVERVIEW
CONTROL PANEL LAYOUT
1. ON/OFF
Pushbutton – Turns the heat pump On and Off.
2. MENU SELECT
button – Use to select menu items. While in the Run screen, pressing this
button displays the Control Panel Menu screen. Also, use this button to scroll through Operator
Setup Menu screens
3. POOL/SPA
button – On the first press the current heat, cool or auto mode will be displayed
along with the active set point, pool or spa. On subsequent presses, the use of the pool or spa
setpoints will be toggled. You can also toggle between the pool and spa set point by using
the Up
and Down arrow buttons.
4. Up and Down Arrow
buttons – Use the Up and Down arrows to raise or lower the
temperature setpoint while in the Run screen. These buttons are also used to scroll
through the various parameter values on the Menu Select and Operator Setup screens.
5. ON Light
– Illuminated when the heat pump is on.
6. SERVICE Light
– Illuminated when an alarm condition exists.
