4 / 14
6 1/2 in
(165 mm)
XTV, KTV
1/2 in
(13 mm)
6 in
(152 mm)
6 in
(152 mm)
VPL
5B
5c
• Push braid back to create
a pucker.
• At pucker use a screw-
driver to open braid.
• Bend heating cable and
work it through opening in
braid.
• Lightly score inner
jacket around and
down as shown.
• Peel off inner jacket.
• Cut and remove
all fiber strands.
• Score and remove
center spacer.
• Remove any remaining
fiber material from bus
wires.
• Pull braid tight to
make pigtail.
• Push braid back and bunch
as tight as possible.
• Lightly score inner
jacket around and
down as shown.
• Peel off inner jacket.
• Unwind heating element,
cut and remove as shown.
• Lightly score clear
jacket around and
down as shown.
• Bend heating cable
to break jacket at
the score then peel
off jacket.
• Push braid forward. Use
a screwdriver to open
braid as shown.
• Bend heating cable and
work it through opening in
braid.
• Remove insulation from
ends of bus wires.
• Pull braid tight to
make pigtail.
go to step 6
go to step 6
IndustrIal Heat tracIng sOlutIOns
EN-RaychemJBS100ECPA-IM-H57463 05/16