Do not perform the Fluoride Filter Wash until the Fluoride Filter Soak process is complete.
Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of
steps in a location suitable for water flow.
FLUORIDE FILTER WASH
1. Reattach the garden hose to the Hose Bib Assembly.
2. Slowly turn on the water 1/4 turn for this entire process.
3. Run water through the upflow inlet side of the Bypass Valve for 15-30 minutes or until the water discharging from the
downflow inlet side of the Bypass Valve runs clear.
4. Turn off the water.
5. Remove the Hose Bib Assembly from the upflow inlet side and attach it to the downflow inlet side of the Bypass Valve.
6. Run the water through the downflow inlet side for 1 minute or until water runs clear.
7. Turn off the water.
8. Remove the Hose Bib Assembly from the Bypass Valve and disconnect the garden hose.
Top View
Whole House Fluoride Filter
Garden
Hose
Hose Bib
Assembly
Water
Bypass Valve
OUTLET
INLET
IMPORTANT
Note
Please save the Hose Bib Assembly as this will be used in the future for the carbon exchange.
Note
FLUORIDE WATER FILTER SYSTEM • 7