TABLE OF CONTENTS
PRODUCT OPERATION AND SPECIFICATIONS ........................................................................................................................ 3
COMPLETE PARTS LIST ......................................................................................................................................................... 3
INSTALLATION OVERVIEW ..................................................................................................................................................... 4
PRE-INSTALLATION ............................................................................................................................................................... 5
FLUORIDE FILTER SOAK. ....................................................................................................................................................... 6
FLUORIDE FILTER WASH. ....................................................................................................................................................... 7
SEDIMENT FILTER INSTALLATION.......................................................................................................................................... 8
FLUORIDE WATER FILTER SYSTEM TANK INSTALLATION........................................................................................................ 9
BYPASS VALVE OPERATIONS ................................................................................................................................................. 10
MAINTENANCE ..................................................................................................................................................................... 11
TROUBLESHOOTING .............................................................................................................................................................. 12
PRODUCT WARRANTY AND REGISTRATION FORM ................................................................................................................... 13
If this or any other system is installed in a metal (conductive) plumbing system, i.e. copper or galvanized metal, the plastic components of the
system will interrupt the continuity of the plumbing system. As a result any errant electricity from improperly grounded appliances downstream
or potential galvanic activity in the plumbing system can no longer ground through contiguous metal plumbing. Some homes may have been
built in accordance with building codes, which actually encouraged the grounding of electrical appliances through the plumbing system.
Consequently, the installation of a bypass consisting of the same material as the existing plumbing, or a grounded "jumper wire" bridging the
equipment and re-establishing the contiguous conductive nature of the plumbing system, must be installed prior to your systems use.
WARNING
When adding a filtration/softening system to homes/buildings supplied by well water, the system should be installed following the pressure tank.
DO NOT USE this system for pneumatic or hydropneumatic applications. If you are using a booster pump, then install this system following the
booster pump.
If you have questions, please call customer service.
CAUTION
IMPORTANT INFORMATION
• Read these instructions carefully and determine the location of all system components before beginning installation.
• Check all applicable plumbing, building, and electrical codes for installation compliance.
• Install the system on the main water supply.
• The use of plumber's tape and/or pipe thread seal paste will be needed on all threaded connections.
• To condition all water in the home, install the system close to the water supply inlet, and upstream of all other plumbing
connnections, except outside water pipes. Outside faucets should remain on unfiltered water.
Homeowners
Phone: 877.842.1635
Professionals
Phone: 877.842.1635
Customer Service Contact Information Section
2 •
FLUORIDE WATER FILTER SYSTEM