Keypad
5
Table 1: Model Number Structure
Voltage Rating:
1
= 190–265 Volt 1 phase input
Output Voltage:
1
= 220V 1 phase output
PID2000 – 1 – 1 – 2 – 3
PID2000-1123:
Product Family
PID2000
= Pentek IntelliDrive
HP Rating:
2
= 2.0 HP
Motor Type:
3
= 3-wire
Fan
The PENTEK INTELLIDRIVE has a thermostatically
controlled internal fan. The fan may not operate under
normal operating conditions. It will automatically start
when necessary to cool the drive.
Keypad
The Keypad programs the drive, monitors the status of the
pump, and views faults if they occur. Each button has a
unique function (see Figure 2). The LCD display shows a
text display of the status of the drive’s operation. Other
LEDs light up to indicate when certain buttons are pressed
or certain events occur.
Runs the Drive at 40 Hz
(with no pressure control)
to allow the installer
to pump out the well
Toggles the pressure setpoint
between 300, 400, and 500 kPa;
default is 400
Views and changes parameters
Shows the last 15 faults
Changes the display to
the previous screen
With code, locks and unlocks the
password protected keys (default
password is 7777)
Selects menu items and
confirms numeric value changes
The up and down arrows scroll through
the menus and change numeric values.
Toggles between English, Spanish,
and French (Default is English )
The left and right arrows
move the cursor.
Power is on to the Drive
The Drive is in Temporary Performance
Mode (TPM) or Jam condition
A fault has occurred
Displays the Drive’s
current operating conditions and
changes the display parameters
Checks for line fill, then
starts the pump in constant
pressure mode
Resets the fault
that stopped the pump
Stops the motor
6007 0509 EX
Hazardous
pressure.
Do
not
connect to
system or restrict
discharge flow
when running in
“Pump Out”
mode.
Figure 2: Keypad functions
Keypad Nomenclature and functions
