Pentair MICROBRITE, Installation And User Manual

Page: 13 / 72

MicroBrite Color and White Light Installation and User’s Guide MicroBrite Color and White Light Installation and User’s Guide
9
DRY/SEALED CONDUIT INSTALLATION (USE PROVIDED KIT)
1.
N ote: The pool water level must be below the level of the 1.5” return fitting
where the MicroBrite will be installed.
2.
Follow the Wet Conduit Installation
Steps 1-10 as described on page 6, 7,
and 8. Skip Step 2. At Step 4
, be sure to install the Optional O-Ring onto the
back of the MicroBrite light.
3.
Stretch O-Ring over lens and seat in proper position.
4. Lubricate O-Ring with provided lubricant.
5.
Pull Adapter Ring over O-Ring and twist adapter ring until tightly secured in
place.
6.
Apply Clear Silicone (recommended pool industry silicone lubricant application)
around the threads of the adapter ring and wall fitting.
Wipe away any excess
silicone lubricant after being assembled into the wall fitting.
7.
Resume the installation process from Step 6 (see page 7) .
1-1/2” Standard
Wall Fitting
Adaptor
Install O-Ring
behind light lens
Apply clear silicone
lubricant to male and
female threads
Light lens