background image

Safety / General Information

2

For parts or assistance, call Master Plumber Pump Customer Service at 

1-800-628-9439

READ AND FOLLOW 

SAFETY INSTRUCTIONS!

This is the safety alert symbol.

When you see this

symbol on your pump or in this manual, look for

one of the following signal words and be alert to the
potential for personal injury.

warns about hazards that 

will 

cause serious

personal injury, death or major property damage if
ignored.

warns about hazards that 

can 

cause serious

personal injury, death or major property damage if
ignored.

warns about hazards that 

will 

or 

can 

cause

minor personal injury or property damage if ignored.

The label 

NOTICE 

indicates special instructions which

are important but not related to hazards.

Carefully read and follow all safety instructions in this
manual and on pump.

Keep safety labels in good condition. 
Replace missing or damaged safety labels.

DESCRIPTION

This laundry tray system is ideal for home wastewater
removal from sinks and wet bars and for drain water trans-
fer from air conditioners or dehumidifiers. The 3/10 HP
submersible pump is equipped with a 3-prong grounding-
type power cord. Motor is oil filled and sealed for cooler
running. Upper sleeve/lower ball bearings on motor shaft
never need lubrication. Automatic reset thermal protection.

NOTICE:

This unit is not designed for applications involv-

ing salt water or brine! Use with salt water or brine will
void warranty.

ELECTRICAL & FLOAT SWITCH 
SPECIFICATIONS

SPECIFICATIONS

Power Supply Required .............................115V, 60 HZ.
Liquid Temp. Range ...............32° F to 120° F (0°-49° C)
Individual Branch Circuit 
Required (minimum) .........................................15 Amps
Discharge ...................................................1-1/4" MNPT

GENERAL SAFETY INFORMATION

Electrically powered sump pumps normally give many
years of trouble-free service when correctly installed,
maintained, and used. However, unusual circumstances
(interruption of power to the pump, dirt/debris in the
sump, flooding that exceeds the pump’s capacity, electri-
cal or mechanical failure in the pump, etc.) may prevent
your pump from functioning normally. To prevent possi-
ble water damage due to flooding, consult your dealer
about installing a high water alarm. See the
“Troubleshooting Chart” in this manual for information
about common sump pump problems and remedies. 
For more information, see your dealer or call customer
service at 1-800-628-9439.
1. Know the pump application, limitations, and poten-

tial hazards.

2. Disconnect the power before servicing.
3. Release all the pressure within the system before ser-

vicing any component.

4. Drain all the water from system before servicing.
5. Secure the discharge line before starting the pump.

An unsecured discharge line will whip, possibly caus-
ing personal injury and/or property damage.

6. Check the hoses for a weak or worn condition before

each use, making certain that all connections are
secure.

7. Periodically inspect the system components. Keep

free of debris and foreign objects. Perform routine
maintenance as required. 

8. Provide a means of pressure relief for pumps whose

discharge line can be shut-off or obstructed.

9. Personal Safety:

a. Wear safety glasses at all times when working with

pumps.

b. Keep the work area clean, uncluttered and properly

lighted – replace all unused tools and equipment.

c. Keep visitors at a safe distance from the work area.
d. Make the workshop child-proof – with padlocks,

master switches, and by removing starter keys.

10. When wiring an electrically driven pump, follow all

electrical and safety codes that apply.

11.

This equipment is only for use on 115 volt (single
phase) and is equipped with an approved 3-conduc-
tor cord and 3-prong, grounding-type plug.

To reduce risk of electric shock, pull

plug before servicing. This pump has not been inves-
tigated for use in swimming pool areas.

Pump is sup-

plied with a grounding conductor and grounding-type
attachment plug. Be sure it is connected only to a
properly grounded grounding-type receptacle.
Where a 2-prong wall receptacle is encountered, it
must be replaced with a properly grounded 3-prong
receptacle installed in accordance with codes and
ordinances that apply.

12. All wiring should be performed by a qualified 

electrician.

Motor

*Switch Setting

Motor

Full Load

in inches (mm)

Model

HP

Amps

On

Off

540015

3/10

10.0

7" (178)

2" (51)

Summary of Contents for Master Plumber 540015

















Reviews: