6
KREEPY KRAULY
®
RACER
™
Pressure Side Pool Cleaner Installation and User’s Guide
Assembling the Cleaner
1. Attach the Quick Connect fitting on the end of the hose to the feed tube on the RACER™ Pressure Side Pool
Cleaner. Be sure the snaps are engaged.
2. Attach the debris bag to the cleaner. Push the bag over vacuum tube to click it into place.
3. Review checklist before use:
• Hoses cut properly and floats evenly spaced.
• Mender nuts are tight on feed hose.
• Wall fitting secure and in place.
• Debris bag and hose assembly attached.
• Ensure debris seal is attached.
See figure 14
.
1. Lower the cleaner carefully into pool.
2. Switch ON the FILTER PUMP.
3. Wait at least 60 seconds to allow air to blow out of the hose.
4. Switch ON the BOOSTER PUMP.
Using the Cleaner
Assembling the Cleaner
Debris Bag
Optional
Sweep Hose
Quick Connect Fitting
(with built-in swivel)
Feed Tube
Lead Hose
Mender Nut
Night Cruize
®
(both sides)
Debris Seal
Debris Seal
Figure 14.
Feed Tube
