Pentair FLECKXT Service Manual Download Page 5

FLECK

 XT Service Manual 

• 

5

Manually Initiating a Regeneration

1.  When timer is in service, press the Extra Cycle button for 5 

seconds on the main screen.

2.  The timer advances to Regeneration Cycle Step #1, and 

begins programmed time count down.

3.  Press the Extra Cycle button once to advance valve to 

Regeneration Cycle Step #2 (if active).

4.  Press the Extra Cycle button once to advance valve to 

Regeneration Cycle Step #3 (if active).

5.  Press the Extra Cycle button once to advance valve to 

Regeneration Cycle Step #4 (if active).

6.  Press the Extra Cycle button once to advance valve to 

Regeneration Cycle Step #5 (if active).

7.  Press the Extra Cycle button once more to advance the 

valve back to in service.

NOTE:   

A manually initiated or queued regeneration can 

be cleared by pressing the Extra Cycle button for 

less than 5 seconds. A system queued regeneration 

can only be cleared by stepping through a manual 

regeneration. If regeneration occurs for any reason 

prior to the delayed regeneration time, the manual 

regeneration request shall be cleared. Pressing the 

Extra Cycle button while in regeneration will cause the 

upper drive to advance to the next step immediately.

Queued Regeneration (RGQ)

From the display screen, while the unit is in service, hold down 

the Extra Cycle button until “RGQ” displays. The valve will 

regenerate when the set regeneration time has been reached.

Timer Operation During Regeneration

In the main display screen, the timer shows the current 

regeneration cycle and the time for that step. The green LED 

light will display when the unit is in regeneration. Once all 

regeneration steps are complete, the timer returns to in service, 

displays a blue LED light, and resumes normal operation. 

Timer Operation During Programming

The timer enters program mode (unit must be in service). 

While in the program mode the timer continues to operate 

normally, monitoring water usage. Timer programming is 

stored in memory permanently upon a normal exit from 

programming mode.

Timer Operation During A Power Failure

All program settings are stored in permanent memory. 

Current valve position, cycle step time elapsed, and time of day 

are stored during a power failure, and will be restored upon 

power re-application. Time is kept during a power failure, and 

time of day is adjusted upon power up (as long as power is 

restored within 12 hours).

NOTE:   

The time of day on the main display screen will flash 

for 5 minutes when there has been a power outage. 

The flashing of the time of day can be stopped by 

pressing any button on the display.

Regeneration Day Override Feature 

If the Day Override option is turned on and the valve reaches 

the set Regeneration Day Override value, the Regeneration 

Cycle starts at the programmed regeneration time.

TIMER OPERATION 

CONTINUED

Flow Meter Equipped Timer

As treated water is used, the Volume Remaining display 

counts down from the calculated system capacity, less the 

reserve volume. Once capacity reaches zero or reserve, if the 

immediate system the unit will regenerate immediately. If it 

is a Fixed, Variable, or Weekly reserve, the unit will queue a 

regeneration (RGQ) and count down Reserve Volume until the 

set regeneration time.

NOTE:   

Reserve Volume is only available in a RGQ system.

Volume Remaining  

(Less Reserve)

Reserve Volume

Summary of Contents for FLECKXT





























Reviews: