6
Mounting the EasyTouch
®
PL4/PSL4 Control Systems Power Center
Mount the EasyTouch PL4/PSL4 Control Systems Power Center enclosure on a flat vertical surface,
such as a wall or post at eye level, at least 5 ft. (1.5 m), (Canada 3 m (9.75 ft)) from the pool, spa or
hot tub.
To mount the Power Center:
1. Position the enclosure against a vertical flat surface. If wall anchors are being used,
support the enclosure in position (horizontally level and square) against the surface and
mark the bracket hole pattern on the wall.
2. Secure the enclosure with three (3) screws in the top and lower mounting bracket holes. If
using wall anchors, drill and set the anchors and secure the enclosure with screws.
EasyTouch PL4/PSL4 Control Systems Power Center (front view)
(front door and high voltage panel removed)
Lower mounting bracket screw holes
Top mounting bracket screw holes
