14 • WHOLE HOUSE CARBON FILTRATION SYSTEM
4. DAYS OVERRIDE
The control will display:
• Press the UP or DOWN ARROW to set the number of days between regenerations. The setting range
is OFF to 30 days.
Notice
In most situations with carbon filter, override can remain “OFF”. Set a number of days if you wish to have
the filter be refreshed periodically regardless of water use.
On WF10-P, WF8-P, WF6-P and WF4-P Iron or Sulfur systems, it is recommended to set the days override
to 3 days. Questions on this setting should be addressed with technical support for your individual
conditions.
Press the SCROLL BUTTON to advance to the next setting.
5. CYCLE 1 - BACKWASH
The control will display:
• Press the UP or DOWN ARROW to change the length of the backwash cycle. The setting range is 0
to 99 minutes.
Press the SCROLL BUTTON to advance to the next setting.
6. CYCLE 2 - BRINE/SLOW RINSE
The control will display:
• Press the UP or DOWN ARROW to change the length of the brine/slow rinse cycle. The setting range
is 0 to 99 minutes (maximum limit).
In most applications, this setting will not need adjusting.
Press the SCROLL BUTTON to advance the next setting.
Override: OFF
Backwash: 10 min
BRN/RNS: 0 min
Notice
Notice
