Pentagram P 2700, Installation And Operation Manual

Page: 40 / 64

PENTAGRAM Designer (P 2700)
Application main window
List of applications – select from the list the applications for which you want to configure the
function fields.
New – add a new application to the list.
Delete – delete the selected application from the list (you cannot delete the applications
configured by default).
List of function fields – select the field whose settings you want to change (you cannot modify
the fields configured by default). If the field has already been configured, you can modify it as
well by clicking the button symbolizing this field in the preview.
Setting – select this field to enable the selected function field.
Hint – enter into the field the tool tip content, which will be displayed on the monitor when the
pen is located above the selected function field.
Use hot key – select the key combination, which will be simulated after pressing the selected
function field.
Linking – enter the path to the file, which will be run after pressing the selected function field.
To browse the folder for the file, click the ... button.
Confirm – press this button to save the selected function field settings.
Enable this manager – select this field to enable function fields. Unselect it to disable them.
OK – close the main window. A prompt will display to save the current configuration if you have
not done so.
Cancel – close the main window, discarding any unsaved changes to the configuration.
18
List of
applications
List of
fields
Preview
EN