PENTAGRAM Nomad Q 7.0 [P 9570]
PENTAGRAM Nomad Q 7.0 [P 9570]
PENTAGRAM Nomad Q 7.0 [P 9570]
PENTAGRAM Nomad Q 7.0 [P 9570]
Memory card
Memory card
Memory card
Memory card
Insert the memory card into the device in such a way so that when looking at the screen, the card connectors are
visible. When looking at the back casing of the device, the card label is visible.
To remove the card from the device, press the card so that it gently slides out, and then pull it out. Prior to
removing the card, make sure that all the applications using it (such as the media player, the navigation
application) have been closed and that no files are being transferred from/to the card. Some navigation
applications use the memory card for storing the configuration and map files. If you remove such a card, it may
cause the application to operate improperly, and in extreme cases even the necessity to reinstall the application.
NOTE! Removing the card when device is in use can cause damage or loss of data, application crash or it can
NOTE! Removing the card when device is in use can cause damage or loss of data, application crash or it can
NOTE! Removing the card when device is in use can cause damage or loss of data, application crash or it can
NOTE! Removing the card when device is in use can cause damage or loss of data, application crash or it can
even freeze the device.
even freeze the device.
even freeze the device.
even freeze the device.
Battery charging
Battery charging
Battery charging
Battery charging
Before you start to operate the device, it is recommended to charge and discharge the battery several times so
that it reaches its full performance and service life.
In the top right corner of the main menu there is an icon representing the battery charge. When the icon is filled
with bars, it means the battery is fully charged. If the icon is empty, the battery is very low and you have to
charge it as quickly as possible. The battery will start charging automatically after connecting the device to the
AC charger or the car charger, plugged in the appropriate socket. During charging, you can operate the device as
normal. The light on the side panel is an additional battery charge indicator – it is red during charging and
becomes green when the charging is complete.
To charge the battery, either:
••••
connect the device to a computer using the USB cable, or
••••
connect the device to the car cigarette lighter socket using the car charger included.
7
77
7
EN
EN
EN
EN
Summary of Contents for Nomad Q 7.0
Page 2: ......
Page 16: ...14 14 14 14 PL PL PL PL ...