2
12 TWO: MOUNTING
SKIP THIS STEP IF YOUR CURTAIN IS NOT PRE-INSTALLED IN BOX HOUSING
13. Install the auto-lock brackets (L)
onto each side of the box housing (A).
Ensure the shutter is in the closed
position.
When the shutter is in the closed
positon, continue operating the
shutter downwards allowing the axle
(E) to turn until the t-clips (H) push
the top of the curtain against the
back of the box housing.
Mount the auto-lock brackets
3/8” (10mm) above the top of the
curtain and in between the two
t-clips closest to the ends of the box
housing (one on each end of the box
housing).
Use the tek screws (J2) provided for
mounting.
*The top of the box housing is not
shown for illustration purposes.
