Pentacon PENTAFLEX AK16, Operation Manual

Page: 15 / 18

This releases the lens and can be
removed (Fig. 5). When inserting, it is
important to note that the lens nose
and the glare drive are plugged into
the corresponding receptacles. The
easiest way to do this is when the
aperture of the lens and the lens
mount are rotated to Ansohlag. With
the 12.5mm lens a vignetting occurs
when the 135mm lens sits at the
same time on the revolver head. The
viewfinder eyepiece (fig. 13 no. 23)
must be adjusted in such a way that
the matt disc grain can be seen with
the greatest sharpness. Using the
plus or minus dioptric adjustable
eyepieces, the spectacle wearer can
adjust this setting to suit the eye and
fix it with the help of the conter ring.
The sharpness of the film image is
fundamentally controlled by the mirror
reflex detector, only second lens
should be used. In the case of
distance mea- surement, the film
must be of the same size (Fig. 5 No.
24).
The drive motor (Fig. 13) is removed
as a tripod camera, or from below,
after removing the protective cap on
the motor connection at the side of
the housing
Used as a handle of the hand-held
camera. Condition is that the red
point on the camera is opposite to
that of the motor, and that the motor
is pressed into the bayonet and
turned to the right until it snaps into
place. The clutch motor axle camera
axis is automatically found. (When