background image

USER INSTRUCTIONS

 

 

 

5

_

E05

 

Heating Sensor malfunction

 

Code 

E05 

lit continuously on the display.  

Call for Service. 

 

 

_

E12

_  

D.H.W Storage Cylinder Sensor Malfunction

 

 

 

Code 

E12 

lit continuously on the display.  

Call for Service.

 

 

_

E16

_  

Electric Fan Malfunction  

 

Code 

E16 

lit continuously on the display.  

Call for Service.

 

 

_

E22

_

  

Parameter programming request   

Code 

E22 

lit continuously on the display.  

Call for Service.

 

 

_

E35

_

  

Flame Detection Malfunction   

Code 

E35 

lit continuously on the display.  

Call for Service.

 

 

_

E42

_

  

Fan Speed P.C.B. malfunction    

Code 

E42 

lit continuously on the display.  

Call for Service.

 

 

 

NOTE: If the boiler is to be left unused for a long period of time,

 the user must do one of the following: 

ƒ

 

Make the boiler safe

 by disconnecting all the power supplies (electricity and gas), and draining the heating 

system and the condensate trap. 

ƒ

  Leave the boiler in 

standby, 

leaving the electricity and gas supplies connected and, consequently the anti-freeze 

function. 

Summary of Contents for SOLENNE SERIES









Reviews: