Penguin Computing Relion 900 Technical Manual Download Page 56

Page: 56 / 127

- 55 -

BIOS Setup

5-2-3 Network Stack

Network stack

Enable/Disable UEFI network stack.

Options available: Enabled/DIsabled. Default setting is Disabled.

Ipv4 PXE Support

(Note)

Enable/Disable Ipv4 PXE feature.

Options available: Enabled/DIsabled. Default setting is Enabled.

Ipv6 PXE Support

(Note)

Enable/Disable Ipv6 PXE feature.

Options available: Enabled/DIsabled. Default setting is Enabled.

PXE boot wait time

(Note)

Press <+> / <-> keys to increase or decrease the desired values.

Media detect time

(Note)

Press <+> / <-> keys to increase or decrease the desired values.

(Note) This item appears when Network Stack is set to Enabled.

Summary of Contents for Relion 900
































































































































Search results

Summary of Contents for Relion 900

Reviews:

Related manuals for Relion 900

Brands by name

Popular brands

Penguin Computing Relion 900, Technical Manual

Search results

Summary of Contents for Relion 900

Reviews:

Related manuals for Relion 900

Brands by name

Popular brands