Penguin Computing Relion 900 Technical Manual Download Page 111

Page: 111 / 127

BIOS Setup

- 110 -

5-4-1 System Event Log

Enabling/Disabling Options

SEL Components

Change this to enable or disable all features of System Event Logging during boot.

Options available: Enabled/Disabled. Default setting is Enabled.

Erasing Settings

Erasing SEL

Choose options for erasing SEL.

Options available: No/Yes, On next reset/Yes, On every reset. Default setting is No.

When SEL is Full

Choose options for reactions to a full SEL.

Options available: Do Nothing/Erase Immediately. Default setting is Do Nothing.

Custom EFI Logging Options

Log EFI Status Codes

Enable/Disable the logging of EFI Status Codes (if not already converted to legacy).

Options available: Disabled/Both/Error code/Progress code. Default setting is Error code.

Summary of Contents for Relion 900
































































































































Search results

Summary of Contents for Relion 900

Reviews:

Related manuals for Relion 900

Brands by name

Popular brands

Penguin Computing Relion 900, Technical Manual

Search results

Summary of Contents for Relion 900

Reviews:

Related manuals for Relion 900

Brands by name

Popular brands