Using a pair of tweezers to handle the
springs,
and
a
small
screwdriver
to
manipulate the bearing carriers, thread one of
the primary springs through the hole in one of
the ears of the central bearing carrier.
Thread the spring through the slots in the
ears of the bearing carrier of the opposing
axle.
Thread a second spring through the hole in the other ear of the central bearing carrier.
Thread that spring through the slots in the
ears of the bearing carrier of the remaining
axle.
Similarly fit the two springs on the other
side of the bogie.
Take the Subframe which goes with the
Drive Unit and place it on the narrow block
for wheeling.
Orientate the Drive Unit correctly with the
Subframe.
Slot the Drive Unit into the subframe with
the primary springs resting on the tops of
the secondary spring seats. Ensure that the
bearing carriers are correctly engaged in the
slots in the subframe.
Push the primary springs down to slide them
outside the secondary spring seats.
Bachmann 66: Final Assembly
56/60
(c) PenBits Model Railways, All Rights Reserved
27/09/2021
Summary of Contents for Bachmann Class 66
Page 2: ......