Bachmann Class 66: Subframes
This section describes the construction of the bogie subframes.
On the Mainframe etches (S2), check that
the slots in the sides are clear to take the
etch thickness.
Make the two main longitudinal folds, each
of which is in three parts carried over the
transom sections under each axle slot. Ensure
the folds are at a true right angle.
Remove the spring Seat- Ear etches (S5)
from the fret. There are two of each hand
for each bogie.
Check that the small etched holes are clear
to pass a 0.5mm drill.
Bachmann Class 66: Subframes
17/60
(c) PenBits Model Railways, All Rights Reserved
27/09/2021
Summary of Contents for Bachmann Class 66
Page 2: ......