Pelsue TFAT-14C Product Manual Download Page 22

Page: 22 / 24

#501003-001 -

Product Manual: Model #TFAT-14C TELESCOPING FALL ARREST TOWER

- Revision 00 - Date: 06-16-2008

Page 22

Prior to storage, the product should be thoroughly inspected and maintained. Repair or replace any worn or damaged
components to prevent any unnecessary down time at the next use.

Follow this procedure:

1. Thoroughly clean the entire unit using a mild soap on the frame and labels.

2. Perform a complete inspection of the unit and document the results prior to storage.

3. Oil or grease hinges and moving components in order to prevent corrosion.

4. A #TFAT-14C series system can be dismantled for storage if desired, follow the reverse of the steps given for assembly

in section 3.0 of this manual.

7.0 - Storage

8.0 - Contact Information

For More Information...

T.A. Pelsue Company
2500 S. Tejon St.
Englewood, CO 80110

Toll Free:

1-800-525-8460

Telephone: 1-303-936-7432
Fax:

1-303-934-5581

Website: www.pelsue.com

Email:

[email protected]

Summary of Contents for TFAT-14C

























Search results

Summary of Contents for TFAT-14C

Reviews:

Related manuals for TFAT-14C

Brands by name

Popular brands

Pelsue TFAT-14C, Product Manual

Search results

Summary of Contents for TFAT-14C

Reviews:

Related manuals for TFAT-14C

Brands by name

Popular brands