Pelsue LG5 Series Product Manual Download Page 6

#500995-001 - 

Product Manual: #LG5 Series Manhole Guard Retrieval System

 - Revision 06 - Date: 01-09-2018

Page 6

1.2 - Pelsue Product Warranty

Pelsue products are designed and engineered to perform as stated in published specifications.  

Quality materials and workmanship are used in the manufacture of this product.  With regular 

maintenance and proper care, Pelsue equipment provides many trouble free hours of opera-

tion.

The T.A. Pelsue Company warrants to the buyer that the Hoist Product furnished will conform 

to specifications and will be free from defects in material and workmanship from the date of 

shipment to the original buyer, for a period of 3 months (90 days).  In the event of failure of any 

components of a Pelsue product within the warranty period, service must be pre-approved by 

the T.A. Pelsue Company, and service must be performed by the T.A. Pelsue Parts and Ser-

vice Department in Englewood, Colorado, or at the option of the T.A. Pelsue Company, service 

may be performed at any designated service center, which may include any authorized service 

center for the component manufacturer.  Unauthorized repairs will not be covered by this war-

ranty.

Damage or failure due to misuse, mishandling, or unauthorized modifications will not be covered 

by this warranty.  Unless otherwise agreed, the T.A. Pelsue Company shall repair or replace the 

defective components within (30) calendar days of notice of failure.  T.A. Pelsue Company’s 

obligation hereunder, shall be limited to the repair or replacement of the product or component 

as set forth above and shall not include any liability whatsoever for damages caused by such 

failure, including, but not limited to consequential or incidental damages flowing from use or 

lack of use of product.

Any replacement, repair, modification, installation, or other service performed by the T.A. Pelsue 

Company shall be warranted by the remainder of the unexpired period of the warranty, or for a 

period of (90) calendar days, whichever is longer.

All materials or parts returned for credit or warranty shall be returned only with prior approval, 

and will be subject to factory inspection before credit is allowed,  Parts claimed defective will 

be replaced upon request and will be invoiced as purchased, subject to credit when the parts 

claimed to be defective have been received and examined by the factory.

This warranty is expressly in lieu of all other warranties expressed or implied, including any 

warranties of merchantability or warranties of fitness for any particular use and all other obliga

-

tions or liabilities in connection with the sale of this equipment. 

T.A. Pelsue Company, 2500 South Tejon Street, Englewood, Colorado 80110, 800-525-8460

Summary of Contents for LG5 Series



























Reviews: