500714-001 - Product Manual - #FT-C70 Carbon Fiber Fall Arrest Tower - Revision 02 - 2015-03-06
Page 7
2.0 - Introduction & Product Information
MODEL:
____________________________________________
Serial Number :
______________________________________
______________________________________
Date of Manufacture (DOM):
__________________________
__________________________
Congratulations on your choice of a
Pelsue Model #FT-C70 Composite Fall Arrest Tower
to compliment your complete
fall arrest system. This equipment has been designed and manufactured to exceed fall arrest requirements and regula-
tions in order to meet the needs of the discriminating operator tasked with the assurance of efficient and safe working
conditions for personnel working upon an elevated surface.
Safe, efficient and trouble-free operation and maintenance of the system requires that anyone who will be operating,
maintaining, or inspecting the equipment, read, understand and follow all of the operation, safety, maintenance, and
inspection instructions contained within this manual. This manual covers the Pelsue Model #FT-C70 Composite Fall
Arrest Tower. Use the Table of Contents as a guide to find specific information.
keep this manual handy for frequent reference and to pass on to new operators. Establish a regular training program
for experienced and new operators per this manual. Establish a regular maintenance and inspection program to keep
the equipment in top condition.
This product is a part of a complete Fall Arrest System.
The user must read, understand and follow the instruc-
tions contained in this manual for each component or
total system before using this equipment. Establish
an appropriate training, maintenance and inspection
program for your people and the equipment. Failure
to follow these instructions could result in serious
injury or death.
2.1 - Serial Number
Product Serial Number
Always give your dealer the serial number of your Pelsue Fall Arrest product when order-
ing parts or requesting service or other information.
Each component of the system (base & tower) will have a Serial Number Label attached.
Each serial number label is permanently embossed with a serial number. The serial number
label will appear as shown in
Figure 2a at the right. One is located on the base assembly
(refer to
Figure 2b), and another is located near the top of the tower assembly (refer to
Figure 2c). A space has been provided below for the recording of the serial number for
future reference.
Figure 2a:
Serial Number Decal
#FT-C70
Figure 2b:
Serial Number Label Location
SERIAL
NUMBER
LOCATION
Figure 2c:
Serial Number Label Location
(BASE)
(TOWER)
(BASE)
(TOWER)
