500714-001 - Product Manual - #FT-C70 Carbon Fiber Fall Arrest Tower - Revision 02 - 2015-03-06
Page 16
Figure #5.2f:
#FT-C70
Adjusting Leveling Pegs
3. #FT-C70 Composite Fall Arrest Tower in RESCUE MODE:
In the event of a fall, the Model #FT-C70 can be used as a rescue device utilizing the following directions;
a.
In the case that a person or persons have fallen, allow them to come to a rest before performing a rescue
(Fig. #5.2e).
b.
At the base of the tower, the leveling screws can be adjusted in whichever direction is more suitable for rescue
(Fig. #5.2f).
c.
Unscrew the peg on the side of the desired direction to lower the tower while screwing in the opposite peg
(Fig. #5.2f).
d.
The tower can be offset a maximum of 23 degrees from the vertical position (Fig. #5.2g).
e.
If not employing a 2 or 3 way SRL System, the #FT-C70 is designed to accept a Pelsue Pole Hoist for rescue
capability.
Figure #5.2e:
#FT-C70
Completely Vertical
Person or Persons
Figure #5.2g:
#FT-C70
Completely Tilted
23º Max
Leveling
Pegs
5.0 - Product Operation (continued)
!WARNING!
- The #FT-C70
tower must not be used as
an anchorage for a fall arrest
device while deployed within its
“Rescue Mode” configuration
