22
7081-148H
www.pelprostoves.com
COMPLETE THE CHECK LIST (Page 9) PRIOR TO LIGHTING YOUR FIRST FIRE
FOLLOW THE ARROWS TO START YOUR APPLIANCE FOR THE FIRST TIME
IT IS CRITICAL FOR THE CORRECT OPERATION OF YOUR STOVE THAT THE FOLLOWING STEPS
BE PERFORMED! A pellet stove, like most things in life is NOT a plug and play appliance.
SETTING THE AIR INLET DAMPER
Because the appliance is made in one location and elevation,
then shipped, moved and installed to a different location, at a
different elevation, vented differently and then using different fuels. It is
not possible for the manufacture to factory set your stove to work
properly without some adjustments.
The damper helps to control the amount of airflow supplied for
combustion.
Damper
pushed in
all the way airflow is minimum.
Damper
pulled out
all the way airflow is increased.
To get the appliance started, push the air damper in all the
Way, then pull outward approximately 1/2”.
This may not be the final setting.
We will cover FINE TUNNING YOUR STOVE later in this manual.
OPENING AND CLOSING THE MAIN DOOR:
Open the stove door by rotating the handle COUNTER
CLOCKWISE, toward the TOP of the stove, until the handle is
about the 3 o’clock position. Swing door open to the
left.
Close the stove door by keeping the handle at the
3 o’clock position. Push the door firmly against the stove.
Rotate the handle downward to the 6 0’clock position to lock.
F
A
B
C
D
E
F
Operation Instructions
