8
Step 2/3
Ripple, Romper & Revo
= Skip to next step
Reddi, Rover & Reyes
= Now that the skewer is inserted
into the hub you will now hand tighten the screw nut
partially onto skewer with narrow side of spring going first
(please see image below)
Ripple, Romper & Revo
= Rotate the stem and fork 180
degrees so they are both faceing forward (Note: Stem is still
loose and will be tightened when installing the handlebar).
Attach wheel to fork, ensure axle is properly seated in fork
dropouts and tighten both sides clockwise with 5mm Allen
key until secure. Please see illustration. (note: Because of
the cushy tires you may need to wiggle the tire a bit past the
front brake on Romper & Revo)
Step 3/3
Axle is securely
seated in dropout
Assembling your bike cont...