6
7
• Use your appliance
in a location that has a comfortable temperature in which it
will not cause perspiration.
• Make sure that the areas you wish to remove hair from are clean, dry, and free
from moisturizing cream or oil.
USING THE DEPILATION HEAD
• Remove the protective cap, by gently pulling, from your unit.
• Turn your unit to the desired
speed, low is recommended
for fine hair and high is
recommended for coarse hair.
0 Power Off
1 Low speed
2 High speed
• To minimize discomfort, hold the skin taut surrounding the area from which you
are removing hair.
• Position your appliance so that it is vertical against your skin, at a 90° angle.
• With the massage points your depilating is practical, comfortable and pain-free.
• Gently slide your unit in short, quick, brush like or sweeping strokes in the
direction of hair growth. For your protection, your appliance may slow down, or
stop operating completely if it is pressed too hard against the skin.
• Slide the appliance on the same area until you remove all the unwanted hair. The
life of your unit depends upon the density, quantity, and type of your hair. Your using
time will shorten since you will have less hair after regular use for a few months.
• Clean your appliance after every use, to ensure using for many years and
obtaining best results.
Using the Depilation Cap for the Sensitive
Areas:
• The depilation cap for the sensitive areas makes it
possible to clean the hairs softly and sensitively. Since the
number of tweezes is reduced, you feel less pain.
• Take out both of the caps by pressing the release
button. Attach the depilation cap instead for the sensitive
areas.
CLEANING THE DEPILATION HEAD
• Your regular cleaning and care of your Arzum Pellini Rechargeable Hair Removal
will extend the life of your unit.
• Turn your appliance to off “0” position and unplug the unit from electric outlet.
• Before
removing
the
depilation head, pull out the
plastic cap located on the head,
which protects the tweezers,
by gently pushing on each side
of the head.
• Use the brush provided
with the unit to brush out any hair that has accumulated on the tweezers.
• Replace the plastic cap that protects the tweezers, by pressing lightly on the
depilation head until it clicks
into place.
• After
replacing
the
transparent cover of the
depilation head in its place,
remove the depilation head
from the unit by pressing the
release button on the side of
the unit.
• Use the brush provided with the unit to remove any hair that has accumulated
between the depilation head and the main unit.
• Replace the depilation head by pressing until it clicks into place on the main
unit.
Attention
1-
When placing the depilation head into the unit, make sure that the teethed wheel
on the unit and the teethed wheel on the depilation head line up.
2-
Do not clean the appliance using water or other liquids. Disc heads may be
scoured by rubbing with alcohol.
HYGIENE
• To clean the stainless steel tweezers, use rubbing alcohol on the tip of the
tweezers with a cotton swab that has been squeezed dry. Before using such cotton
swab, make sure that it is not soaked with alcohol. Do not use any other liquid to
clean this unit.
• Depilation is for private use only. In accordance with the hygiene rules, this kind
of tool must not be used by others.
