8
9
USING THE SPECIAL SHAVER HEAD FOR
SENSITIVE AREAS
• Turn your appliance to off “0” position.
• Unplug the unit from electric outlet.
• Gently
remove
the
depilation head from the unit
by pressing the release button
on the side of the unit.
• Attach the shaver head and
slightly pres until it clicks into
place.
Attention:
• When placing the shaver head into the unit, make sure that the teethed wheel
on the unit and the teethed wheel on the shaving attachment line up.
• Remove the protective cover on the head.
• The shaver head should only be used at the High Speed “2” setting.
• Hold your appliance so that it is vertical against your skin, at a 90° angle (in the
upright position). This allows the shaver to trap the hair through the holes of its
metal protection cover and smooth away any stubble.
• To ensure more speedy and effective shave with
special shaving attachment trim hairs that are longer than
10mm, before using your unit.
• Shaver head comb provide to smooth hairs before
depilation. Replace the comb by pressing lightly on the
shaver head until it clicks into place.
CLEANING THE SPECIAL SHAVER HEAD
FOR SENSITIVE AREAS
• Turn your appliance off to “0” position.
• Unplug the unit from electric outlet.
• Separate the foil section
plastic cover by pressing the foil
release buttons on both sides of
the head, before disassembling
the special shaver head from
the main unit.
• Clean the hairs that have remained on the foil and blade, by using the brush
which supplied with the unit.
• Replace the folio section plastic cover on the special
shaver head mounted in the main unit, by slightly
pressing until it clicks into place. Then, replace the
transparent protective cap on the special shaver head.
• When it is not in use, store your appliance in its
special pouch.
USING THE EXFOLIATION HEAD
Attention:
• Use the exfoliation head only on your legs not on your armpits or bikini line.
• Turn your appliance to off “0” position.
• Unplug the unit from electric outlet.
• Gently
remove
the
depilation head from the unit
by pressing the release button
on the side of the unit.
• Attach the exfoliating head
and slightly pres until it clicks
into place.
• Switch the appliance on.
• Choose speed 1 or 2, depending on the required exfoliation intensity. We
recommend exfoliating each leg 1-2 times for 1-2 minutes in a week.
Note: Don’t use the exfoliating head within two days after depilation.
Attention:
• For hygienic reasons, the exfoliating head should only be used by one person
• Don’t use any cream, foam, gel or just before or during the exfoliation. After
exfoliation, apply a mild cream or body milk to hydrate the skin and improve its
texture.
• We advise you to exfoliate before going to bed at night. Any skin irritation that
may develop will diminish overnight.
