pellenc AIRION BP, Translation Original Manual, Page: 45 / 56

BACKPACK BLOWER AIRION BP
57_148610-A
8. STORAGE AND TRANSPORT
8.1. STORAGE
• Switch off the tool (see Section 5.1.2, “Stopping the tool”).
• Disconnect the battery (see Section 4.5, “Disconnecting the battery”).
• Store the battery (refer to the battery operating instructions).
• Clean the tool (see Section 6.1, “Cleaning the tool”). Always make sure the tool is clean and its battery is charged
before storing it.
• Store the tool away from humidity and dust.
• Store the tool in a safe place, out of reach of children and unauthorized persons.
Tool storage position
1. Optionally, to reduce the size of the tool, remove the
nozzle tip (see Section 4.3.2, “Fitting / removing noz-
zle tips”) and the auxiliary nozzle (see Section 4.3.1,
“Fitting / removing auxiliary nozzles”).
2. Completely loosen the load return straps on either
side of the harness.
3. Hook on the nozzle holder loop (13) to the tool holder
hook (15).
4. Set down the tool on its stand.
8.2. TRANSPORT
• Switch off the tool (see Section 5.1.2, “Stopping the tool”).
• Disconnect the battery (see Section 4.5, “Disconnecting the battery”).
• Put the tool in the storage position (see Section 8.1, “Storage”).
• Ensure that the tool and the battery are secured in the transport vehicle.
45