pellenc AIRION BP, Translation Original Manual

Page: 16 / 56

BACKPACK BLOWER AIRION BP
57_148610-A
To fit an auxiliary nozzle:
1. Slot in the auxiliary nozzle onto the tool up to the
stud.
2. Make a quarter turn in the direction shown to lock in
the auxiliary nozzle.
The auxiliary nozzle is locked when the "triangle" on
the tool is aligned with the "padlock" on the auxiliary
nozzle.
To remove an auxiliary nozzle:
1. Make a quarter turn in the direction shown to unlock
the auxiliary nozzle.
2. Pull out the auxiliary nozzle from the tool.
4.3.2. FITTING / REMOVING NOZZLE TIPS
Depending on the intended use of the tool, choose a suitable nozzle tip to fit onto the (short or long) auxiliary nozzle.
Refer to Section 5.6.1, “Choice of nozzle tip type according to use”.
Whatever nozzle tip you choose, the procedure is identical.
To fit a nozzle tip onto an auxiliary nozzle:
1. Fit the nozzle tip onto the auxiliary nozzle on the at-
tachment fitting provided.
The marks on the auxiliary nozzle and on the nozzle
tip must be aligned.
The nozzle tip is now locked on.
16