5
6
POSITION VERTICAL SADDLE ARM SLOTS FOR
CASE HEIGHT AND WHEEL WELL CLEARANCE.
FIT BOLTS THROUGH SLOTS IN SADDLE ARMS.
PARTIALLY TIGHTEN M8 LOCKNUTS TO ALLOW
FINAL ADJUSTMENT.
DETERMINE LOCATION ALONG RAIL FOR CASE.
ADJUST SADDLE ARMS TO MATCH THE MOUNTING
PLATE SPACING OF YOUR CASE.
WITH M8 NUTS STILL LOOSENED, CLEAN AND
DEGREASE BED WALL BEHIND FEET OF BOTH
SADDLE MOUNTS.
1. PEEL OFF TAPE LINER TO ADHERE FOOT
TO BED WALL IN FINAL POSITION.
2. PUSH FOOT FIRMLY AGAINST BED WALL
TO ENSURE TAPE ADHESION AND SNAP
STRIP MATING.
3. TIGHTEN M8 NUTS AT RAIL TO SECURE
MOUNT IN FINAL POSITION.
REPEAT FOR OTHER SADDLE ARM.
BX55S = 19.5 IN
BX85S = 39.0 IN
6
MOUNT SADDLE ARM SUBASSEMBLIES TO RAIL
7
LOADING CARGO CASE ON SADDLE MOUNTS
7.1
6.1
6.2
6.3
TILT CASE 20 DEGREES AND LOWER
REAR EDGE TO REST ON SADDLE ARMS.
BY CLEARING THE ARMS AT THE
FRONT, THE REAR HOOKS WILL
ALSO CLEAR THE PLATES.
SLIDE CASE BACK AGAINST
UPRIGHTS TO ENGAGE HOOKS.
TILT CASE DOWN TO REST IN
HORIZONTAL POSITION.
7.2
7.3
CLEARING REAR HOOKS
CHECK BOTH REAR HOOKS ARE NOW ENGAGED
3
1
2