Pelican SDDLMT2B, Quick Start Manual, Page: 2 / 6

1 2
7
6
12
5
4
3
1
13
2 8 10 9
11
PARTS LIST TOOLS REQUIRED
*
1
GET ORGANIZED
M4 ALLEN KEY/ DRIVER
M10, M13
WRENCH/SOCKET
ITEM NO. DESCRIPTION QTY.
1 SADDLE ARM SUBASSEMBLY, TOYOTA TACOMA 2
2 CASE PLATE CLAMP 2
3 QUICK RELEASE PIN 2
4 DUAL-LOCK SNAP STRIP, ADHESIVE BACK 4
5 M6 NYLON RETAINER WASHER 4
6 M8 NYLON LOCKNUT, FLANGED 4
7 M8 X 30 CARRIAGE BOLT 4
8 M6 X 14 BTN HD HEX DRIVE SCREW 4
9 M6 FLAT WASHER 4
10 M6 SPLIT LOCK WASHER 4
11 LANYARD 2
12 RAIL NUT, TOYOTA TACOMA 4
13 THREADED DETENT KNOB 2
* Tools not included.
2
INSTALL CASE PLATE CLAMPS
PREFERRED MOUNTING IS ON HINGED SIDE OF CASE,
FOR OPENING CASE LID FROM OUTSIDE OF TRUCK BED.
USING M4 ALLEN DRIVE TOOL, ASSEMBLE CLAMPS TO PLATES USING
M6 SCREWS, WITH LOCK WASHERS AND FLAT WASHERS AS SHOWN.
PARTIALLY TIGHTEN SCREWS TO ALLOW FINAL ADJUSTMENT.
REPEAT FOR 2ND MOUNTING PLATE ON SAME SIDE OF CASE.
2.1
2.2
2.3